|
|
Post by joshw on Nov 24, 2022 23:42:25 GMT
Sorry if I've missed it somewhere, but do you have a mechanical drawing of the board, or CAD or anything else we could pull dimensions from for the board and mounting holes? We're attempting to integrate it into a 3D model of a new prototype. Thanks!
|
|
|
|
Post by Botletics on Nov 28, 2022 17:41:12 GMT
Here you go! Everything's the same as the Arduino Uno board, except shorter (2.3in instead of 2.6in). Measurements are in mils. Attachments:
|
|
|
|
Post by Botletics on Nov 28, 2022 17:51:43 GMT
Here is the DXF file of the board outline and holes if that helps as well. Attachments:SIM7000 Shield v6.dxf (14.26 KB)
|
|
|
|
Post by joshw on Nov 29, 2022 21:55:59 GMT
Perfect, thank you sir!
|
|
